Measurement and Inspection on the Lathe
When a machine part reaches the point where it can no longer…
Basic Turning Operations
Introductory lesson notes on the lathe, its parts, and basic turning operations. A first-step resource for those new to lathe work.
The Effect of Cutting Oils on Turning
The special cooling fluid that reduces friction between cutting tools on machine…
What Do Cooling / Cutting Fluids Do? Their Functions
The topic of this article will be the role that cutting fluids/lubricants…
How to Maintain a Lathe
Weekly, monthly, and yearly periodic maintenance of the lathe must be carried…
Groove Turning
GROOVE: Cylindrical recesses formed on the face, inner, and outer surfaces of…
Tapping on a Lathe
Tapping on a Lathe We’ve dedicated this article to tapping on a…
How Is Facing Done on a Lathe
In this article we’ll cover general information about the facing operation on…
What Is a Tool Holder. What Does It Do. How Is It Used?
A tool holder is a term used in turning, in the manufacture…
Drilling a Center Hole (Center Seat) on a Lathe
The operation of drilling a hole into the face of a workpiece…
Lathe Tool Bits by Material and Area of Use
The types of lathe tool bits are as follows: Types of Lathe…
Cutting Speed and RPM on a Lathe
Definition and Importance of Cutting Speed on a Lathe The distance the…
Safety Rules for Working on a Lathe
In this article we will cover the safety rules for working on…
Knurling. The Knurling Process on a Lathe
Knurling All knurls made in manufacturing shops are classified as fine, medium,…
Taper Turning Methods
In this article we cover the taper types accepted as standard in…
Operations Performed on a Lathe
In this article we’ll cover what turning methods there are. We’ll look…
Parts of a Lathe, Illustrated
Parts of a Lathe In this article, we’ll cover the parts of…