Workplace Safety When Working With an Angle Grinder

In this article, we’ll look at the workplace safety rules to follow when working with an angle grinder. Safety rules for working with an angle grinder. We’ll go into details such as what the angle grinder, cutting/grinding disc, work environment, and personal protective equipment should be like for workplace safety.

Workplace Safety Rules When Working With an Angle Grinder

We’ve shared a video about this topic above. It should help you get a sense of the subject.

Checks on the Angle Grinder

To stay safe, make sure the machine is properly insulated. If you notice any fraying on the plastic insulation of the power cord, repair it before plugging the machine in.

Don’t use the machine if its handle has come off. The handle is designed so you can grip the machine firmly with both hands.

Don’t use an angle grinder without its guard. If the angle grinder’s guard has been removed, refit it, and check that it’s correctly adjusted, especially to protect you from fragments in case the disc breaks. Never use a machine without its guard.

Checking the Cutting/Grinding Disc

Is there a declaration of conformity to the EN 12413 standard?
The max working speed (max speed) marked on the disc must be equal to or greater than the speed marked on the angle grinder.

Check the expiration date, usually stamped on the metal center of the disc.

Never use a broken or cracked disc. A broken or cracked disc carries a risk of bursting when it’s running at high speed and encounters cutting/grinding pressure.

Use Personal Protective Equipment

Personal protective equipment will let you get through a potential accident with the least possible harm.

What is personal protective equipment:
■ Suitable clothing
■ Mask
■ Eye protection,
■ Ear protection,
■ Protective gloves

Workplace Safety While Working With an Angle Grinder

Make sure the workpiece can’t move, that the work area is clean and tidy, and that no one else is at risk.
Check that the disc isn’t mounted loosely, then start the machine, to make sure the wheel doesn’t break or run with excessive vibration.

Let it run freely for at least 30 seconds. Only then bring it into contact with the workpiece

Work in a stable position. Always grip the machine with both hands.
Without applying excessive pressure to the disc, grind at roughly a 30-degree angle to the workpiece.

After turning the machine off, wait for the disc to stop and unplug the machine before setting it down.
Never try to force the disc to stop.
If it won’t be used again, remove the disc.

To avoid the kind of workplace accidents pictured above, workplace safety rules must be followed when working with grinding discs and angle grinders.